SRS provides a 13 point inspection of your fire extinguisher to ensure the fire extinguisher will work in the event of an actual fire emergency.

1) CLEAN EXTINGUISHER – using degreasing solution.
2) VISUAL EXAMINATION – is performed on entire unit. Carefully inspecting for signs of dents, rust, corrosion, pitting or other shell damage.
3) CHECK PRESSURE GAUGE – to ensure that the extinguisher is fully pressurized.
4) LOCATE MOST RECENT TEST/MAINTENANCE DATE – to determine need for required hydrostatic or internal maintenance.
5) WEIGH EXTINGUISHER – to ensure correct amount of extinguishing agent.
6) REMOVE DISCHARGE HOSE – to inspect for signs of blockage.
7) REMOVE LOCKING PIN – to be sure locking pin can be easily removed in the event of an actual fire emergency.
8) CHECK HANDLE/LEVER – for smooth discharge operation.
9) INVERT/LOOSEN AGENT – lightly tapping the fire extinguisher using a rubber mallet ensures free flow of extinguisher agent when the fire extinguisher is operated.
10) RETURN EXTINGUISHER TO PROPER LOCATION
11) CHECK MOUNTING – to ensure fire extinguisher is installed securely on correct mounting hook/bracket.
12) CHECK HAZARD APPLICATION – to be sure that the fire extinguisher is the right type for the potential fire hazard.
13) ATTACH SERVICE TAG

SRS portable service vehicles are fully capable of “on the spot” recharging of ABC dry chemical fire extinguishers & some wet chemicals.

We can fill multiple types of extinguishers at our Testing / Recharge facility:
• Wet Chemicals
• Water
• K-Class
• Water Mist
• Foam
• Dry Chemicals
• ABC
• BC
• D
• Clean Agents
• Carbon Dioxide

Recharging is performed in strict accordance with BS5306 part 3:2009 and manufacturer's requirements.